Digital Backup Recording (HD/SDI/IEEE 1394) The AJ-HPX3000 comes equipped with an HD-SDI output terminal that can provide HD/SD baseband output. Use the AJ-HPX3000 in tandem with the AJ-HPM100 P2 Mobile or a digital VTR (such as the AJ-HD1400), and you can link rec start and stop operations for simultaneous backup recording. The AJ-HPX3000 also comes equipped with an IEEE 1394-compliant DVCPRO output (6-pin) terminal. Use the AJ-HPX3000 in tandem with a compatible recorder such as the AG-HPG10G P2 Gear, AJ-HPM100 P2 Mobile or FOCUS FS-100 "FireStore," and the AJ-HPX3000 can make degradation-free backup recordings with a DVCPRO HD or DVCPRO 50 stream output.*1 The AJ-HPX3000's two digital output systems — HD-SDI and IEEE 1394 — provide compatibility with a wide range of broadcasting and IT-based equipment. *1: IEEE 1394 backup recording is possible only with the DVCPRO HD/DVCPRO 50 codec. HD/SD SDI Line Recording (Option) When the AJ-YA350AG optional HD/SD SDI input board is installed, HD/SD line recording is possible from SDI (serial digital) input. *The input signal must be in the same format as the recording format of the camerarecorder. HD-SDI/SD-SDI Down-Conversion Output The AJ-HPX3000 comes equipped with two BNC video line outputs for flexible monitoring or line recording use

• VIDEO OUT: Switchable between HD-SDI/SD-SDI (down conversion) and analog composite (down conversion) output. • MON OUT: Outputs down-converted SD video only. Switchable to analog composite (thumbnail output possible), VF or Y. USB 2.0 Interface Compatible with Host Mode In device mode, the P2 cam's card slot can be used to connect a PC as an external device for nonlinear editing and transmission over networks. In host mode, P2 files can be copied onto a hard disk without using a PC. Multi-Function RCU System (Option) The AJ-HPX3000 comes equipped with an RCU terminal for connecting the optional AJ-RC10G Remote Control Unit. This lets you adjust the image and control the recording operation while monitoring the camera image. Additional Features • By mounting the optional AJ-GPS910G GPS unit, the AJ-HPX3000 can record real-time position data (latitude, longitude, and altitude), conforming to UMID standards. * The GPS unit is not available in some areas. • DC power supply for the BT-LH80W LCD monitor • Color bar (switchable between SMPTE, ARIB, and full color) and standard audio signal (1-kHz test tone) output • Built-in SMPTE time code generator/reader, with time code In/Out terminal • Genlock input terminal can also be used as return video (HD-Y/VBS) • UniSlot® wireless receiver compatible * UniSlot® is a trademark of Ikegami Tsusinki Co., Ltd.